Labocosmetica IDROSAVE – Polymer rinseless wash pH neutral
Labocosmetica IDROSAVE – Polymer rinseless wash pH neutral
WHY CHOOSE IDROSAVE? DISCOVER THE BENEFITS?
The use of synthetic polymers mean that dirt is lifted and captured, facilitating its removal: its excellent lubricant properties enable cleaning without damaging or scratching the surface. Improves colour and gives surfaces a silky and gleaming finish. Leaves a self-cleaning, protective layer on bodywork that limits build-up of dust and dirt and keeps the vehicle clean for longer.
Idrosave, also significantly speeds up drying thanks to its notable de-watering effect, which enables water to run off the bodywork, leaving it dry, polished and clean!
IDROSAVE IS DESIGNED TO CLEAN, POLISH AND PROTECT WITH A SINGLE PROCESS, WITHOUT RINSING
Idrosave is designed to clean, polish and protect with a single process, without rinsing. It can even be used outdoors with high temperatures. Its formula uses rinseless technology to safely remove road dirt from any vehicle using just a few litres of water, guaranteeing a big water saving. Does not leave water marks, even with hard-water conditions.
How to use
HOW TO USE IDROSAVE
- Use one bucket with a grit guard;
- Dilute the product 1:200 by adding 3 caps to 6 liters of water directly into the bucket;
- Immerse a soft microfiber glove or sponge in the bucket;
- Pass the glove or sponge over the car without pressing down;
- Dry with a soft microfiber cloth;
- Work panel by panel;
- Repeat steps from point 1 to point 6 until the vehicle has been cleaned completely.
EXPERT ADVICE
- On particularly dirty vehicles we recommend pre-treating the bodywork with a spray of water and the same Rinseless shampoo before washing (dilution 1:30 – 3 caps in 1 liter of water).
- For this operation we recommend using a dispenser, proceeding one panel at a time.
- This will further help to lift the dirt before touching the vehicle, minimising the possibility of causing small imperfections in the paintwork.
WE SUGGEST YOU FOLLOW THESE TIPS WHILE USING THE PRODUCT
To maximise the sheen and depth of colour, use with a dilution of 1:60 as though it were a quick detailer. Dispense the product onto the panel to be cleaned and pass a clean soft microfiber cloth over it. Finish with a second cloth if necessary. Move on to the next panel.